Terrarium Thermostat | Temperature Controller with 2.4m Probe
Our Terrarium Thermostat control the temperature of your terrarium and verarium so that your reptile gets the right amount of heat.
The temperature probe line is 2.4 meters long.
The maximum load power is 1500W.
Temperature control ranges from -9 to 39 Degrees Celsius.
1. The controller turns on the power, the temperature bar shows the current actual temperature, the status bar shows [RUN], and press the set temperature to run, set the temperature to remember.
2. The temperature "+" key: increase the set temperature.
In the status display [SET], each time you press this key once, set the temperature rise 1_, press and hold this key can be continuous rise, until +39_, leave the key operation for 5 seconds, automatically return to the running state. The set temperature is memorized. Power off after power, set the temperature unchanged.
2. Temperature "-" key: reduce the set temperature.
When the [SET] is displayed, press this key once to set the temperature to decrease by 1_. Press and hold this key to continue to rise continuously until -9_, and return to the running state after leaving the key for 5 seconds. The set temperature is memorized. Power off after power, set the temperature unchanged.
When the ambient temperature name set temperature -1_, turn on the load power;
When the ambient temperature is set to temperature + 1_, cut off the load power;
When the set temperature -It ambient temperature <set temperature + 1_, the original operating state unchanged.
Set the temperature range: -9_ to 39_
Be The First To Review This Product!
Help other PetWave Pty Ltd users shop smarter by writing reviews for products you have purchased.